-40%
Filament Power Transformer, Primary 115vac , Secondary 6.5vac , 9587 See Note:
Filament Power Transformer, Primary 115vac , Secondary 6.5vac , 9587 See Note:
Filament Power Transformer, Primary 115vac , Secondary 6.5vac , 9587 See Note:
Filament Power Transformer, Primary 115vac , Secondary 6.5vac , 9587 See Note:

Filament Power Transformer, Primary 115vac , Secondary 6.5vac , 9587 See Note:

$ 15.83

Availability: 100 in stock
  • All returns accepted: ReturnsNotAccepted
  • Country/Region of Manufacture: Unknown
  • Condition: Used
  • Featured Refinements: Vintage Power Transformer
  • Brand: Unbranded
  • Model: Power Transformer

    Description

    Primary or what I am going to call the primary since I have no documentation on the two that I have, is
    marked 1 thru 4 and the secondaries are 5 and 6, 7 and 8.
    The secondaries have been wired in parallel when I got them.
    115vac on 1 and 4 was giving me a reading of about 6.45vac on the secondaries.
    I proceeded in powering the filaments on two 6146 tubes connected in parallel and the primary current
    was .2amps. I didn't measure the secondary current but a cording to docs. on the tubes I see the filaments
    on 6146s are suppose to draw about 1.25amps each.
    I left the transformer connected for about an hour and it only became slightly warm.
    Sold as is and if someone does know what use these were intended for, I welcome the feedback.
    No Returns!