Submersible Signal Cannon, Salute | 1400 gr BP | Stainless | M1400S SPLODER®

Description

The SPLODER
®
MULTITOOL - A submersible black powder signal salute cannon on a leash. Milled from solid 416 stainless steel and capable of handling a self-measured 1400 grain powder charge. (The stainless steel ring is removable for loading or for upright signal cannon operation.) With the cannon submerged in 2 feet of water, it will produce a 60-foot tall water spout. A submerged M1400S SPLODER
®
, although quiet, creates a shockwave you can feel in the ground 30 feet away.
SET (DOES NOT include powder or fuse.)
LOADING:
Insert a quality cannon fuse and fill to the top of the bore (self-measured 1400 grains), tamp your charge before adding your wadding, and then tamp again. GOEX
®
(Black Powder) Fg - FFFg or Cannon can be used as well. Requires 1/8" fuse. Waterproof using 2.5" circular labels (canning labels) to seal the top of the bore. Duct tape can also be used. It's not necessary to waterproof the the flash hole as long as the cannon’s bore is tightly sealed.
SPECIFICATIONS:
EFFECTIVE CAPACITY: 500 - 1400 grains (Full loads not necessary)
CANNON (416 Stainless) = 2.75" D x 5.75" H - 1.500" BORE | WEIGHT 7 LBS
TAMPER (6061 Aluminium) = 0.875" D x 5.75" H
CABLE HARNESS (
Galvanized
| Vinyl Coated) = 0.240" D x 20'
SET (DOES NOT include powder or fuse.)
MADE IN THE USA
REMEMBER TO CHECK YOUR STATE AND LOCAL LAWS
(Salute Cannons are not designed, or capable of firing a projectile, they are intended to be used as noise making devices only.)